An SMSTS mock test lets you check what you know before the exam that ends CITB's five-day Site Management Safety Training Scheme course. The exam has 25 questions in 35 minutes, and you need 26 of the 32 marks to pass. The 20 practice questions below are written from a site manager's seat, and each one comes with the answer and the law behind it. They suit anyone booked on our SMSTS course or its refresher.
CITB says the paper tests your knowledge of the law and how you'd apply it as a manager. The books only open for the last 15 minutes, so the duty holders and the figures need to be in your head before you sit down. CITB's rules also bar its exam paper from use as a mock test, so every question here is our own.
How the SMSTS exam works
The exam comes at the end of the course, once you've done CITB's four core exercises and passed your tutor's review. Its 25 questions cover the whole course. Eighteen are multiple choice at one mark each. The other seven are worth two marks and ask for several answers or a short written one, all on CITB's focus areas of working at height, vehicles and pedestrians, manual handling, asbestos, dust, noise and vibration.
That's 32 marks, and you need 26, or 81%, to pass. You get 35 minutes, with GE700 and the XA6 workbook allowed only in the last 15. Score 23, 24 or 25 and you can resit once. The refresher paper is the same, but only GE700 is allowed.
CITB's Site Safety Plus scheme rules hold the detail, and our SSSTS or SMSTS guide compares the two courses. In a live virtual classroom, video and sound stay on for the whole exam, as our guide to doing SMSTS online explains. For the CITB HS&E test, see our CITB mock test guide.
Practise with 20 SMSTS questions and answers
CITB gives you 35 minutes for 25 questions, so aim to finish these 20 in 28 minutes without notes. The two-mark questions don't always give you options, so for questions 7, 8 and 11 to 16, answer before you read the list. Supervisors can try our SSSTS mock test.
The law and CDM duties
Q1. Which section of the Health and Safety at Work etc. Act 1974 covers your employer's duty to people walking past your hoarding?
- A. Section 2, the duty to employees
- B. Section 3, the duty to people who aren't employees
- C. Section 7, the duties of employees
- D. None, because the pavement is the council's
The answer is B, because section 3 says employers must run their work so that people outside their employment aren't exposed to risks, so far as is reasonably practicable.
Q2. A design change means your team will now break out an old concrete slab. What happens to your risk assessment?
- A. It stands until its yearly review
- B. Only the designer needs to update it
- C. It's reviewed only after an accident
- D. It must be reviewed now
The answer is D. Regulation 3 of the Management of Health and Safety at Work Regulations 1999 says an assessment must be reviewed after a significant change, or if it may no longer be valid.
Q3. Your client has hired a groundworker and a frame contractor. What does CDM 2015 say the client must do?
- A. Appoint a principal designer and a principal contractor, in writing
- B. Nothing, if each firm writes its own plan
- C. Let the contractors pick a lead between them
- D. Appoint a CDM coordinator for the project
The answer is A, because regulation 5 makes both appointments compulsory wherever more than one contractor is, or is likely to be, involved.
Q4. On a project for a commercial client, which of these duties belongs to the principal contractor?
- A. Preparing the health and safety file
- B. Notifying HSE about a notifiable project
- C. Planning, managing and monitoring the construction phase
- D. Appointing the principal designer
The answer is C, under regulation 13. The health and safety file is the principal designer's job, while notifying HSE and making appointments fall to the client.
Q5. When must the principal contractor draw up the construction phase plan?
- A. Within 30 days of starting on site
- B. Before the site is set up
- C. When an HSE inspector asks for it
- D. Before the building is handed over
The answer is B. Regulation 12 says it's drawn up in the pre-construction phase, before the site is set up, and sets out the health and safety arrangements and site rules.
Q6. Which of these projects has to be notified to HSE?
- A. 20 working days, never more than 10 workers on site
- B. 60 working days, never more than 8 workers on site
- C. 28 working days, up to 15 workers on site at once
- D. 45 working days, 25 workers on site at the busiest point
The answer is D. Regulation 6 makes a project notifiable if it's scheduled to last over 30 working days with more than 20 workers on site at once, or to go over 500 person days. Project B tops out at 480. The client notifies, and the notice must be displayed in the site office.
High-risk work and setting up the site
Q7. You're planning how to install new roof plant. What do the Work at Height Regulations 2005 ask you to consider first?
- A. Whether it can be done without working at height
- B. Which harnesses and lanyards to issue
- C. Whether netting can go under the work
- D. How far anyone could fall, and onto what
The answer is A. Regulation 6 puts avoiding work at height first, then preventing falls, then reducing the distance and consequences of one, the order HSE's step-by-step guide follows.
Q8. Your scaffold's working platform has a fall of 2 metres or more and has just been inspected. How long must you keep the inspection report?
- A. Only until the next inspection is recorded
- B. At an office, for one year from the inspection
- C. On site until the work ends, then 3 months at an office
- D. Until the scaffold is taken down
The answer is C, under regulation 12, and the inspector must get the report to you within 24 hours. Our Work at Height Regulations guide covers the rest.
Q9. When must a competent person inspect a supported trench your groundworkers are working in?
- A. Once a week, and again after heavy rain
- B. At the start of each shift, and after anything that could weaken it
- C. When it's first dug, and again before backfilling
- D. Every 7 days, and whenever a new gang starts
The answer is B. Regulation 22 of CDM 2015 also calls for one after any accidental fall of material.
Q10. With no examination scheme, how often must lifting accessories such as slings and shackles be thoroughly examined?
- A. Every 3 months
- B. Every 6 months
- C. Every 12 months
- D. Only when they're new
The answer is B, because regulation 9 of LOLER 1998 sets 6 months for accessories and for anything lifting people, and 12 for other lifting equipment.
Q11. People on foot can't safely use your main vehicle gate. What does CDM 2015 say you need?
- A. A sign telling them to wait for a gap
- B. Hi-vis for anyone who walks through
- C. A one-way system for vehicles
- D. A marked pedestrian door next to the gate, kept clear
The answer is D, because regulation 27 asks for at least one clearly marked pedestrian door in the immediate vicinity of the gate, kept free from obstruction.
Q12. Your gang has a pallet of heavy blocks to shift. What's the first duty under the Manual Handling Operations Regulations 1992?
- A. Avoid hazardous manual handling, so far as is reasonably practicable
- B. Keep every lift under 25 kg per person
- C. Train the gang in safe lifting first
- D. Rotate the gang so no one lifts all day
The answer is A. Regulation 4 puts avoiding it first. Only then do you assess and reduce what's left.
Dust, noise, vibration and asbestos
Q13. What does HSE's construction dust guidance tell you to do first when your bricklayers need to cut concrete blocks?
- A. Issue tight-fitting masks to everyone cutting
- B. Fit water suppression to the cut-off saw
- C. Damp the area down after each shift
- D. Order blocks to size, or use a block splitter
The answer is D. HSE's construction dust sheet puts stopping or reducing the dust first, then water or on-tool extraction, with masks last. Regulation 7 of COSHH also puts prevention first and protective equipment last, and our COSHH guide covers the assessment behind it.
Q14. What does the 87 dB(A) exposure limit value in the Control of Noise at Work Regulations 2005 mean for your team?
- A. It's the level where you first assess the risk
- B. No worker may be exposed above it, allowing for their hearing protection
- C. It's the level where hearing protection zones start
- D. It applies to sudden peak noise only
The answer is B. Under regulation 4, hearing protection counts against the limit but not against the 80 and 85 dB(A) action values. HSE's noise regulations page and our noise at work guide explain all three.
Q15. What's the daily exposure action value for hand-arm vibration?
- A. 0.5 m/s² A(8)
- B. 1.15 m/s² A(8)
- C. 2.5 m/s² A(8)
- D. 5.0 m/s² A(8)
The answer is C. HSE's hand-arm vibration guidance says employers should act to reduce exposure at 2.5 and that the 5.0 limit shouldn't be exceeded, while 0.5 and 1.15 are the whole-body values in regulation 4.
Q16. You're starting fit-out in an occupied office. Under the duty to manage asbestos, what must the building's dutyholder do?
- A. Presume materials contain asbestos unless strong evidence shows they don't
- B. Remove all asbestos before any contractor starts
- C. Survey the building only if it went up before 1980
- D. Report every asbestos material it finds to HSE
The answer is A, from HSE's duty to manage guidance on regulation 4 of the Control of Asbestos Regulations 2012. HSE also asks for a written management plan, reviewed every 12 months or sooner if needed.
Fire, reporting, welfare and waste
Q17. On a site in England or Wales, who does HSE say is usually the responsible person for general fire safety?
- A. The client
- B. The local fire and rescue service
- C. Each contractor's own fire marshal
- D. The main or principal contractor in control of the site
The answer is D, from HSE's construction fire safety page. Article 9 of the Regulatory Reform (Fire Safety) Order 2005 makes that person carry out a fire risk assessment, and our hot works permit guide covers hot work.
Q18. One of your joiners falls from a stepladder and can't do their usual work for nine days in a row, not counting the day of the accident. It isn't a specified injury. When must you report it under RIDDOR?
- A. Within 7 days of the accident
- B. Within 10 days of the accident
- C. Within 15 days of the accident
- D. Only after 30 days off work
The answer is C, under regulation 4. Specified injuries, such as a broken arm, must be notified without delay and reported within 10 days, as HSE's reporting timescales page explains.
Q19. Under CDM 2015, which of these must your site's rest area include?
- A. The means for boiling water
- B. A shower for every worker
- C. A first-aid room
- D. A smoking shelter
The answer is A. Schedule 2 also asks for tables, seats with backs and a way to prepare and eat meals, and regulation 13 makes the principal contractor provide them.
Q20. On a site in England, a skip firm is taking your mixed waste. What does the waste duty of care ask of you?
- A. Nothing more, once the skip leaves site
- B. Paperwork only if the waste is hazardous
- C. Check the carrier is registered, and do a transfer note per load
- D. Keep all waste on site until the job ends
The answer is C. Section 34 of the Environmental Protection Act 1990 sets the duty, and gov.uk's business waste guide spells out the carrier check and the transfer note.
How to prepare in the week before your SMSTS exam
Go to every session in full. CITB needs full attendance, and if illness stops you finishing day one, you start the course again. Take the four core exercises seriously too. Your tutor's review leans on them, and failing it keeps you out of the exam.
Get to know GE700 and the XA6 workbook during the week, since 15 minutes is only enough to look up a figure or two.
For the focus areas, practise answering with no options in front of you. Say out loud the two controls you'd pick for vibration, or the order you'd tackle dust in.
Your course notes are still your best revision, and your tutor may open the course with CITB's own "What do you know?" paper. A mock test like this one shows you where the gaps are.
Already hold SMSTS? Book the refresher in time
The two-day SMSTS refresher renews an in-date certificate for five more years. Attend it before the expiry date on your certificate, because CITB sends anyone whose certificate has lapsed back to the full five-day course, as our guide to SSSTS and SMSTS certificates explains.
See dates and book your SMSTS course
Your SMSTS exam is short. With the books shut until the last 15 minutes, the duties and figures in this mock test need to be second nature before you sit down. See dates, ask for a price and book your SMSTS course, in a classroom or live virtual classroom, on our SMSTS course page.
Frequently asked questions
What is the SMSTS exam like?
It's a 35-minute paper at the end of the five-day course, sat under exam conditions with an invigilator. Most questions are multiple choice, and seven ask for more than one answer or a short written one. You can only sit it once you've completed CITB's four core exercises and passed your tutor's review, and the books stay closed until the last 15 minutes.
How many questions are in the SMSTS exam?
There are 25 questions, worth 32 marks in total. Eighteen are multiple choice at one mark each. The other seven are worth two marks each and come from CITB's seven focus areas, among them manual handling, dust and vibration. CITB chooses the questions to cover every part of the course, so no module is safe to skip.
What is the pass mark for SMSTS?
The pass mark is 81%, which means 26 out of 32 marks. The SMSTS refresher uses the same pass mark. The seven two-mark questions hold 14 of those 32 marks between them, so the focus areas they come from are worth extra revision.
What happens if I fail the SMSTS exam?
If you score 23, 24 or 25, you can resit once without redoing the course. The resit can be offered on the same day if you agree, or taken within 30 days, on another course's final day or at a standalone session. Below 23 there's no resit, and failing the resit means taking the SMSTS course again. CITB leaves any resit fee to the training provider.
Is the SMSTS exam open book?
Only for the last 15 minutes. For the first 20 minutes you work from memory. After that you can use GE700, the comprehensive guide to construction site safety, and XA6, the site management delegate workbook. On the refresher, only GE700 is allowed. With so little time, the books are best used to check answers you've already worked out.
Is there an exam on the SMSTS refresher?
Yes. The two-day refresher ends with a paper of the same kind, with 25 questions, 32 marks, 35 minutes and an 81% pass mark. There's no trainer review, so once you've attended in full, the exam decides the result. Only GE700 is allowed in the last 15 minutes, and 23, 24 or 25 marks gets you one resit.


Student Login
Kerem Ismail