This SSSTS mock test has 15 practice questions written from the supervisor's side of the job. They cover the checks you make before work starts, the briefings you give and what to do when something goes wrong. Each answer names the law or HSE guidance behind it. The exam itself is CITB's own paper at the end of the two-day SSSTS course, and you need 24 of its 30 marks to pass.
These are our own questions, not CITB's, so treat them as practice rather than a preview. Part of passing comes before the paper anyway, because CITB won't let you sit it until you've passed a trainer review that includes giving a short toolbox talk.
How the SSSTS exam works
CITB's Site Safety Plus scheme rules set the paper. You sit it at the end of the course, it has 25 questions worth 30 marks, and you get 30 minutes. The pass mark is 80%. The first 20 minutes are closed book, then for the last 10 you can open your SSSTS Workbook, the course book you keep.
The trainer review comes first. Your trainer checks that you've done the mandatory exercises, joined in and delivered a toolbox talk of about five minutes, and you can't sit the exam without passing it.
For resits and the refresher, see our SSSTS or SMSTS guide. Site managers can try our SMSTS mock test, and our CITB mock test covers the CSCS card test.
15 SSSTS practice questions, with answers
Sit this SSSTS mock exam with the answers covered and about 18 minutes on the clock, CITB's pace.
Your role, briefings and reporting
Q1. A new labourer joins your gang on his first morning, and the principal contractor hasn't inducted him. What does he need before he starts?
- A. Nothing, if he holds a CSCS card
- B. A suitable site induction
- C. The construction phase plan, to read later
- D. Nothing, if he's worked on other sites this year
The answer is B, because CDM regulation 15(9) says the information a contractor gives each worker must include a suitable site induction where the principal contractor hasn't already given one.
Q2. Which plan for tomorrow's toolbox talk fits HSE's description of one?
- A. A short talk on one topic, such as the new loading bay
- B. An hour on every hazard on the site
- C. Reading the whole risk assessment aloud
- D. A written quiz on the site rules
The answer is A. HSE's toolbox talks page calls one "a short presentation to the workforce on a single aspect of health and safety". Our toolbox talks guide has topics to start from.
Q3. One of your gang removes some edge protection to pass blocks through and doesn't put it back. What do you do?
- A. Let him finish, then mention it at the next toolbox talk
- B. Put a warning sign by the gap
- C. Note it in the site diary at the end of the shift
- D. Stop the work until the edge protection is back
The answer is D. Section 8 of the Health and Safety at Work etc. Act 1974 says no person shall "intentionally or recklessly interfere with or misuse" anything provided for health, safety or welfare, so the gap gets closed before anyone carries on.
Q4. While your gang is loading out, the excavator's arm touches a bare overhead power line. Nobody is hurt. How does RIDDOR, the law on reporting incidents, treat it?
- A. Not reportable, as nobody was hurt
- B. Only the electricity company needs telling
- C. A dangerous occurrence, so it's reportable
- D. Reportable only if the power went off
The answer is C. Plant touching a bare overhead line carrying more than 200 volts is on RIDDOR's list of dangerous occurrences, and regulation 7 makes those reportable even when nobody is hurt. Tell your site manager straight away so it gets reported.
Health and welfare
Q5. After an afternoon of cutting floor tiles, how should your gang clean up the fine dust on the floor?
- A. Vacuum it, don't sweep it
- B. Sweep it up with a stiff brush
- C. Blow it away with compressed air
- D. Leave it for the next trade
The answer is A. HSE's COSHH guidance names silica dust from tile cutting as a harmful substance the work itself creates, and says to vacuum, not sweep. Our COSHH guide covers the rest.
Q6. The area round the cut-off saw is a hearing protection zone. A labourer wants to nip in for a tool without his ear defenders. What's the rule?
- A. Fine, if he's in and out in under a minute
- B. Fine, if he's had a hearing test this year
- C. Fine, if he stays behind the operator
- D. He puts hearing protection on before going in
The answer is D, because regulation 7(3) of the Control of Noise at Work Regulations 2005 says that, so far as is reasonably practicable, nobody enters a hearing protection zone without hearing protectors.
Q7. A new labourer asks you how much the law lets him lift on his own. What do you tell him?
- A. 25 kg, if he's over 18
- B. The law doesn't set a weight limit
- C. 50 kg, once he's trained
- D. Whatever's printed on the bag
The answer is B. HSE's manual handling guidance says "the weight of a load is important, though the law does not set specific weight limits".
Q8. Your firm takes on a casual labourer for a fortnight. He's neither an employee nor self-employed, and the risk assessment says he needs safety glasses. Who pays for them?
- A. He does, because he isn't an employee
- B. He does, until he's worked for you for a month
- C. Your firm, free of charge
- D. Your firm, then it takes the cost out of his pay
The answer is C. Since April 2022, the PPE rules have also covered casual workers like him, who aren't employees but aren't in business for themselves. HSE's page on the change says they get PPE "free of charge as they do for employees".
Q9. Your site's only first-aider is off sick today. What does the law let your employer do so work can carry on?
- A. Appoint a person to take charge until they're back
- B. Stop work until they're back
- C. Nothing extra, as long as the kit is stocked
- D. Call 999 for every injury instead
The answer is A. Regulation 3(3) of the Health and Safety (First-Aid) Regulations 1981 lets an appointed person take charge of the kit, and of anyone who needs a doctor or nurse, while a first-aider is away "in temporary and exceptional circumstances". Regulation 4 says employees must be told the first-aid arrangements, so tell your gang who it is.
Q10. On your morning walk round, the welfare cabin's basins only run cold because the heater has failed. Does that meet the CDM welfare rules?
- A. Yes, if there's soap
- B. Yes, if there's hand sanitiser
- C. Yes, with fewer than 20 workers on site
- D. No, the basins need hot and cold, or warm, water
The answer is D, because Schedule 2 to the CDM Regulations 2015 says washing facilities must include "a supply of clean hot and cold, or warm, water", plus soap and something to dry your hands with.
Fire, permits and high-risk work
Q11. A delivery of plasterboard has been stacked across the signed escape route from your floor. What should happen?
- A. It's moved at the end of the shift
- B. It's moved now, to clear the route
- C. A sign goes up pointing round it
- D. It stays, as long as the fire alarm works
The answer is B, because CDM regulation 31(4) says an emergency route must be kept clear and free from obstruction "so that it may be used at any time".
Q12. What should be in place before a plumber lights his torch to braze pipework on your floor under a hot work permit?
- A. An extinguisher somewhere on site
- B. A signed permit, and nothing else
- C. Combustibles cleared, an extinguisher to hand and a careful watch
- D. Nothing extra, if he's experienced
The answer is C. HSE's guidance on fire risks from site work lists those three precautions for hot work, and says a permit to work system can help manage the risk on larger projects.
Q13. The scaffold your gang will work from went up last month, and its platform is 4 metres up. Which check must have been done before they use it?
- A. An inspection in that position within the last 7 days
- B. Only the inspection when it went up
- C. A look by whoever's up there first that morning
- D. An engineer's examination once a year
The answer is A. Under regulation 12(4) of the Work at Height Regulations 2005, a construction working platform with a drop of 2 metres or more can't be used unless it's been inspected in that position within the previous 7 days. Our work at height guide covers the rest.
Q14. What does HSE say should happen before one of your gang uses a ladder that fell off the van this morning?
- A. Nothing, if it was checked last week
- B. The site manager signs it off
- C. He gives it a pre-use check before using it
- D. It goes back to the supplier for testing
The answer is C, because HSE's ladder safety page says the user does a pre-use check before using a ladder, and again after something changes, such as it being dropped.
Waste and the environment
Q15. Light plastic wrapping from your section keeps blowing out of an open skip and across the road. What does the waste duty of care expect?
- A. Nothing, as long as the skip is collected on time
- B. Nothing, because it's the skip firm's problem now
- C. Burning the light waste on site to keep it down
- D. Reasonable steps to stop it escaping, such as covering the skip
The answer is D. In England and Wales, section 34 of the Environmental Protection Act 1990 makes anyone who produces or keeps waste take reasonable measures to stop it escaping from their control or anyone else's. Burning it is out too, as HSE says site bonfires should not normally be allowed.
How to prepare if you haven't sat an exam in years
If you haven't sat an exam since school, you're not on your own. CITB's pre-course leaflet says your trainer will help you prepare and practise for the test, and that you don't need perfect English, because the trainer explains any new words.
Be there for all of it. CITB only certifies people who attend the full 15 hours. Join in with the exercises, which count towards the trainer review, and pick your toolbox talk topic early, perhaps from the Toolbox talks book you're given.
In the exam, read each question twice and watch for words in bold, which CITB's leaflet says matter. Answer what you know in the first 20 minutes and mark the rest, then look those up in your workbook in the last 10.
Bigger question banks online give you more repetition, and if that helps, use them. Check what they say about the exam against CITB's rules first, as some describe a different paper. None of them is CITB's paper, ours included, because CITB doesn't allow it to be shared or used as a mock test.
Keep it current with the SSSTS Refresher
Your SSSTS certificate lasts five years, and you renew it by attending the one-day SSSTS Refresher before it expires, because once it lapses CITB sends you back to the full course. Our guide to SSSTS certificates explains how to check your date.
Book your SSSTS course
The exam is the last half hour of a two-day course, and the two days are where you get ready for it. We offer the course in a classroom or a live virtual classroom. The course page lists the dates and lets you ask for a price, so pick a date and book your SSSTS course.
Frequently asked questions
What is the SSSTS exam like?
It's a 30-minute paper at the end of the course, and most of it is multiple choice. CITB's pre-course leaflet says you pick the best answer from A, B, C or D. A few questions ask you to name items, fill in missing words or list one-word answers. You won't need to write any full sentences.
How many questions are in the SSSTS exam?
There are 25 questions worth 30 marks in total, so some are worth more than one mark, and the paper shows the marks for each. CITB's scheme rules say the questions cover the assessment criteria in the course's scheme of work, so the paper sticks to what the course teaches.
What is the pass mark for SSSTS?
You need 80%, which is 24 of the 30 marks. Before you can sit the paper, you also need a pass on every part of the trainer review, which CITB marks pass or fail, including the exercises and your toolbox talk.
What happens if I fail the SSSTS exam?
You can resit once if you score 21 to 23 marks, as long as you've done the exercises and passed the trainer review. If you agree, the resit can happen that day, otherwise within 30 days, face to face or remotely. Below 21, or a failed resit, means the full course again, and the provider may charge for a resit.
Is there an exam on the SSSTS refresher?
Yes. The SSSTS Refresher ends with a 30-minute paper of 25 questions, with the same 80% pass mark as the full course and the SSSTS Refresher Workbook open for the last 10 minutes. There's a trainer review too, but no toolbox talk. You need an in-date SSSTS certificate to take the refresher at all.
Can I sit the SSSTS exam online?
Yes, if you take the course in a live virtual classroom. CITB says you show original photo ID before any Site Safety Plus course starts. On a remote SSSTS course you must be "visible via the video at all times", with your microphone on for the whole course, and CITB makes an online exam tool compulsory. In the exam, you can only use your phone in the open-book minutes.


Student Login
Kerem Ismail